Rabu, 16 Maret 2016

HYDROBIOS Sediment Corer



437330-sediment-corer-hydro-bios
437330-hydro-bios-sediment-corer

Sediment Corer

Tube-shaped bottom sampler for soft and sandy grounds

ABOUT
The Sediment Corer is easy to handle and can be operated manually in shallow waters with a push rod or on a rope simply using gravity in greater water depths. During descent the plastic valve flap on top of the transparent plexiglass tube is held open to let the water flow freely through the tube. To retrieve the sample the corer is lifted from the sediment and the water pressure at the valve flap closes the tube. A vacuum is holding the sediment sample in place and is preventing washout. Out of the water the provided piston is put into the lower end of the tube. The tube holder with rope stirrup is taken off and the tube with the core sample is placed onto the piston. When the tube is now pressed onto the piston the core sample will be removed for examination.
Hydro-Bios No. 437 400
Spare Parts & Accessories

Replacement Core Tube

Replacement Core Tube,
made of plexiglass
Hydro-Bios No. 437 405

Special Core Tube

Special Core Tube,
made of stainless steel
Hydro-Bios No. 437 406
TECHNICAL DATA
Materialstainless steel, PVC, plexiglass
Dimensions100 mm dia. x 1000 mm length
Core tube size600 mm length, 70 mm inner dia.
Weight6 kg
ORDERING INFORMATION
Products
437 400Sediment Corer incl. transparent 
plexiglass core tube
Accessories
437 410Transverse Bar to be fixed onto 
the stirrup for sampling by hand
Spare Parts
437 405Replacement Core Tube, 
made of plexiglass
437 406Special Core Tube, 
made of stainless steel

Tidak ada komentar:

Posting Komentar